Page 1 of 1
Method for exporting skeletal meshes from Ued?
Posted: Tue Aug 18, 2009 9:09 pm
by mentalhunter
Well lol, is there any? pyronious send em alink of how to static meshes to 3DSmax but how you export skeletal meshes from unrealed? if there even is a method at all, i'd like to know, thanks
Re: Method for exporting skeletal meshes from Ued?
Posted: Tue Aug 18, 2009 9:45 pm
by Matrix224
Yes, I've done it with Knifee weapons.
1. Open whatever package you want.
2. Make a new class under Actor, in the package MyLevel
3. In its code, make...something like'
Var Mesh M;
function fu()
{
m=SOMEMESH;
}
then compile
4. Make a blank cube map and add that actor in it
5. Save the map as whatever
6. Close UED then Reopen it and go to your map
7. In the log, type
obj savepackage package="OriginalPackage" file="Something.u"
then, your mesh should be in Something.u
OriginalPackage HAS NO EXTENSIONS. DONT PUT
obj savepackage package="OriginalPackage.u" file="Something.u"
NO. BAD.
Other than that..
profit?
Re: Method for exporting skeletal meshes from Ued?
Posted: Tue Aug 18, 2009 10:13 pm
by Gizzy
function fu()
{
m=SOMEMESH;
}
Nu uh, you forgot the quote marks.
Code: Select all
Function fu()
{
M = Mesh'MeshNameHere';
}
Would be correct.
Or you could use uModel. uModel will give you the PSK (Model) and PSA (Animations) of a skeletal mesh, so you can recompile with textures and sounds into one .u, instead of using texture and sound packages with the above method. Both methods are great, and don't fuck the mesh up like UTPT (Which doesn't support exporting skeletal animations lawl). The uModel method takes longer, but you can end up with a single .u file, easier for distribution. On the other hand, the method Matrix suggested (And the method I prefer) is much quicker and doesn't require UCC, but means you will end up with additional sound or texture files. (If you intend on using them with the exported mesh)
Re: Method for exporting skeletal meshes from Ued?
Posted: Tue Aug 18, 2009 10:43 pm
by Matrix224
function fu()
{
m=SOMEMESH;
}
Nu uh, you forgot the quote marks.
Code: Select all
Function fu()
{
M = Mesh'MeshNameHere';
}
Would be correct.
Yes but usually, I'd just copy-paste the mesh name from an actor if possible. Otherwise, if you're as experienced with meshes as Mental-hunteR and don't know to quote it, then you need to go die. Fast. It was also just a small example.
Also,
".... but means you will end up with additional sound or texture files."
Not necessarily. You can easily combine it into the .u after exporting it, UCC not required.
Re: Method for exporting skeletal meshes from Ued?
Posted: Tue Aug 18, 2009 10:46 pm
by []KAOS[]Casey
http://www.gildor.org/en/projects/umodel
any further instructions you may need are in the manual.
TL;DR = RTFM
Re: Method for exporting skeletal meshes from Ued?
Posted: Tue Aug 18, 2009 11:14 pm
by mentalhunter
Wow, lotsa methods after all hehe, thanks alot guys, this will do
Re: Method for exporting skeletal meshes from Ued?
Posted: Wed Aug 19, 2009 7:42 am
by Smirftsch
someone who writes that down in the wiki maybe?
Re: Method for exporting skeletal meshes from Ued?
Posted: Thu Aug 20, 2009 10:39 am
by Gizzy
Done.
http://www.oldunreal.com/wiki/index.php ... eal_and_UT
Someone might want to edit the formatting a bit, I have no clue about that
Re: Method for exporting skeletal meshes from Ued?
Posted: Thu Aug 20, 2009 1:23 pm
by mentalhunter
Yes it looks good and well explained but, like in UT99 most custom Skeletal meshes are attatched to or SkeletalChars or AdvancedModelSupport, the best thing to do then is upload the skeletal mesh you wish to use for Unreal into the package its attatched to like as mentioned before AdvancedModelSupport or SkeletalChars and then export it. At least thats how i do it.
This is for putting them into an upackage, not export the skeletalMesh from Unrealed into PSK and PSA format.
But you did some great work over there with putting that whole story on Wikipedia
Re: Method for exporting skeletal meshes from Ued?
Posted: Thu Aug 20, 2009 1:25 pm
by Matrix224
Actually Casey once made me a BS'd skeletalchars.u for Unreal so you don't need to do whatever to try to seperate it
Re: Method for exporting skeletal meshes from Ued?
Posted: Fri Aug 21, 2009 2:56 pm
by Gizzy
But you did some great work over there with putting that whole story on Wikipedia
Lol, it wasn't wikipedia, it was the Oldunreal Wiki, and thanks
Re: Method for exporting skeletal meshes from Ued?
Posted: Sun Aug 23, 2009 4:44 pm
by Turboman.
wow, i had no idea extracting PSK skeletal animations was possible already!
that would make animating alot easier, that way we can only rig a player model and compile it with the UT soldier animations
speaking of which, i haven't really checked into the subject yet but are the actual PSA/PSK's included in 227?
Re: Method for exporting skeletal meshes from Ued?
Posted: Sun Aug 23, 2009 7:30 pm
by []KAOS[]Casey
no psa/psk are included in 227
but the format is identical to UTs {with improvements}
tl;dr
any normal UT skeletal mesh will work ,you just need to extract it properly, either with the obj savepackage method or umodel.
Re: Method for exporting skeletal meshes from Ued?
Posted: Sun Aug 23, 2009 7:34 pm
by mentalhunter
Yes, i just wanted to say, i tryd exporting skeletal models from Postal2 which uses Unreal engine 2, and somehow at every Skeletal model i export from Postal2 to Unreal somehow gets screwed up a bit, as in the animations dont play at all, or they play half and move like they are s doll or statue. It could be the Uc or something but i tryd searching in the Postal2 Editor for the import data but couldnt find it anywhere. Anyone got any clue what the problem might be?
Re: Method for exporting skeletal meshes from Ued?
Posted: Sun Aug 23, 2009 7:50 pm
by []KAOS[]Casey
it uses likely uses animation combining, which is supported in 227g
Re: Method for exporting skeletal meshes from Ued?
Posted: Sun Aug 23, 2009 7:59 pm
by Turboman.
WOW thats just awesome, combining would make skeletal animation just about perfect, and it would save alot of people hours of animating the same full sequence
Just curious, any information on animation combining? i know what it does but, are there any tutorials on setting it up?
Re: Method for exporting skeletal meshes from Ued?
Posted: Sun Aug 23, 2009 8:26 pm
by Shivaxi
Animation combing eh? It'd have to be 2 seperate sections of the body, like 1 animation animating upper body (arms head torso) and the 2nd animation like the lower body (legs) so u can combine running different directions with say a firing animation. Cause like....what would happen if u tried combing 2 animations that animate the body parts in different ways/directions?
Re: Method for exporting skeletal meshes from Ued?
Posted: Mon Aug 24, 2009 2:21 am
by Matrix224
Ok well I got some UT2k4 players into Unreal but they have no weapon bone. How can I add one? I have MilkShape, so if anyone knows, please, do tell!
Re: Method for exporting skeletal meshes from Ued?
Posted: Mon Aug 24, 2009 3:37 am
by .:..:
Heres how I completely imported one:
Code: Select all
#exec MESH MODELIMPORT MESH=MercMaleC MODELFILE="Models\MercMaleC.psk"
#exec MESH LODPARAMS MESH=MercMaleC STRENGTH=0.1
#exec MESH ORIGIN MESH=MercMaleC X=0 Y=0 Z=110 YAW=-64 PITCH=0 ROLL=0
#exec MESHMAP SCALE MESHMAP=MercMaleC X=0.37 Y=0.37 Z=0.37
#exec MESH WEAPONATTACH MESH=MercMaleC BONE="Bone_Weapon"
#exec MESH WEAPONPOSITION MESH=MercMaleC YAW=0 PITCH=-64 ROLL=64 X=0.0 Y=0.0 Z=0.0
#exec MESH BOUNDINGBOX MESH=MercMaleC XMIN=-129.0 YMIN=-129.0 ZMIN=-208.0 XMAX=129.0 YMAX=129.0 ZMAX=208.0
#exec MESH DEFAULTANIM MESH=MercMaleC ANIM=BipedMaleA
#exec Texture Import File="Textures\MercMaleCBodyA.bmp" Name=MercMaleCBodyA Mips=On MASKED=0 Group="Skins"
#exec Texture Import File="Textures\MercMaleCBodyA_0.bmp" Name=MercMaleCBodyA_0 Mips=On MASKED=0 Group="Skins"
#exec Texture Import File="Textures\MercMaleCBodyA_1.bmp" Name=MercMaleCBodyA_1 Mips=On MASKED=0 Group="Skins"
#exec Texture Import File="Textures\MercMaleCHeadA.bmp" Name=MercMaleCHeadA Mips=On MASKED=0 Group="Skins"
#EXEC MESHMAP SETTEXTURE MESHMAP=MercMaleC NUM=0 TEXTURE=MercMaleCBodyA
#EXEC MESHMAP SETTEXTURE MESHMAP=MercMaleC NUM=1 TEXTURE=MercMaleCHeadA
Re: Method for exporting skeletal meshes from Ued?
Posted: Mon Aug 24, 2009 4:09 am
by Matrix224
Ah that fixed it. Thanks
Re: Method for exporting skeletal meshes from Ued?
Posted: Mon Aug 24, 2009 1:19 pm
by Matrix224
Ok, now I also get this in the log for 2 custom ut2k4 models
Log: Warning: missing bone/animation link for Dummy13 index 17137
Log: Warning: missing bone/animation link for Dummy01 index 17138
Log: Warning: missing bone/animation link for Dummy06 index 17139
Log: Warning: missing bone/animation link for Dummy12 index 17140
Log: Warning: missing bone/animation link for Dummy11 index 17141
On another it said the same thing with the addition of missing bone/animation link for BoneWeapon.
Any ideas?
Maybe if its possible, I have to remove the 'skeleton', which would break the animations.